中文版
English
Current position：Home - Vision Applied AOI - Remotor Appearance Checker Series
Product Name：Double Remotor Apperance Checker
This equipment is on the lower surface of the remote control, quality testing, can be detected on the surface of remote control board and a key surface quality, stains, ink flying and key-press wrong appearance quality, can be in below the label, serial number, the screws are assembled into detection. Through special optical imaging and image processing, with high precision and high efficiency image algorithm and visual technology, so as to find out the remote control on the surface quality problem.
- Descr
- Para
- Down
- Instruc
AT2 type of remote control both the front and at the same time detection equipment, and can test one or two products at the same time. Using testing box and control box body integration design. Devices can be mobile, no installation fixed can be directly used independently.
This equipment has the following features:
1. Using multiple high resolution camera and lens, USES the advanced visual inspection application algorithm and the analysis algorithm of image processing software, high detection precision, detection stability is good;
2. Appearance quality detection was carried out on the remote control both the front and at the same time, and can support 1-2 remote control at the same time adhere to the test;
3. Adopts high brightness LED light warm color of unique design, automatic frequency detection, the service life is long, detection effect is stable and reliable;
4. Using the unique optical unit design scheme of the remote control can be overcome on the surface of wire drawing, curved surface and curved keys of inhomogeneous reflective phenomenon;
5. Type product testing, support multiple type remote control product modeling capabilities, easy modeling, the modeling can be completed within 20 minutes, and can save, support reuse, has realized the different size, various types of remote control test;
6. High detection efficiency, can run continuously 24 hours a day, never tired: for normal operation, a detection 2 at the same time, positive and negative detection, can be more than 800 or so per hour;
7. After the test to detect the defects in real time alarm and eye-catching, and has the function of counting statistics;
8. Photoelectric sensor automatic induction position step by step, responsive and reliable, able to adapt to different materials of remote control products. Test after test results output with a variety of forms such as sound, light and screen display;
1. The detection of silk screen printing, printing more wrong, incomplete, bearing, stain and ink;
2. The silk-screen printing offset detection and deflection, the user can be set according to the shipment allowed by the screen printing offset and deflection Angle;
3. Test the wrong buttons, color is wrong;
4. Precision can be software configuration according to user requirements, the highest detection accuracy can reach 0.20 mm, stable precision is 0.25 mm;
5. Under stable detection ability for 0.25 mm precision support remote maximum length is 300 mm, width can compatible with industry standard design of the remote control type;
6. Test speed: for normal operation personnel, a detection 2 at the same time, positive and negative detection, can be more than 800 or so per hour;
|
|
|
|
|
|
Integration design, the equipment itself does not need special to install, simply environment and requirements can be installed as follows:
1. The power supply voltage: AC 220 v, grid stability;
2. Power: 650 w;
3. > 4 bar clean positive pressure air supply;
4. Clean environment can provide on site dust control measures and clean process, in order to prevent the remote control has large dust impact test equipment;
5. The operating temperature range: 0 ~ 40 ℃; Working range of relative humidity: 30% ~ 80% (not condensation);