中文版 English Favorites

Vision Applied AOI

Welcome, friends from Shenzhen City

Search

Current position:Home - Vision Applied AOI - Remotor Multi-Functions Testor Series

Product Name:Remotor Auto-keypress Testor


This product is used in various infrared remote controller manufacturer online testing, terminal device detects incoming infrared remote control. This device can be of different manufacturers, different models infrared remote engineering prototype self-learning, may infrared signal strength, code-shaped, quiescent current, dynamic current, fully automatic multi-function buttons and other tests, such as optional remote visual inspection, the check the appearance of the screen can be bad, offset printing, misting, buttons installed wrong, the wrong color and so on. Achieve a two step process is completed, greatly improve efficiency, save a lot of labor costs.

  • Descr
  • Para
  • Down
  • Instruc

(1) visual programming interface, easy to use;

(2) adaptive variety of remote control, automatic entry keys;

(3) Pulse width measurement accuracy as compared to 1% accuracy;

(4) the intensity of digital detection and judgment, fully simulate the distance test;

(5) dynamic and static current test, microamp, milliamp-speed automatic switching;

(6) 1.3V ~ 4.0V power supply voltage can be digitally programmed, error <± 5mV;

(7) can be easily achieved high low voltage and polarity programmable transformation;

(8) 0 voltage (positive and negative tiny resistors shorted) Programmable discharge;

(9) Easy adjustment fixture, remote controller adapted to different shape, quick and easy to set up different remote detection program;

(10) Optional remote visual inspection function, check the appearance of poor printing, offset printing, misting, buttons installed wrong, the wrong color, etc.;

(11) Click header precise, easily and quickly coordinate positioning keys easily increase or decrease, move, change the test keys and functions;

(12) using the ping-pong mode, so separate sets of test fixture, while taking the discharge side of the detection, simultaneous detection of up to four remote control or PCBA;

(13) If no matching remote visual inspection feature 1,200 tests per hour, the fastest remote control (about 50 keys), such as the optional remote control visual inspection function, tested 1,000 units per hour, the fastest remote control (approximately 50 keys), almost matching the remote control does not function speeds close visual inspection, a two step process is completed, greatly improving efficiency and save on labor costs;

(14) Test results displayed automatically saved, bad key, bad machine at a glance;

1. Test Functions:

(1) to test the remote control infrared signal strength, infrared codes shaped, quiescent current, dynamic current, carrier error, multifunction buttons, etc.;

(2) If the appearance of one of the selected detection function, you can check the remote appearance quality: poor printing, offset printing, misting, buttons installed wrong, the wrong color, etc.;


2. Technical Specifications:

(1) Programmable output voltage supply (10mV level tone voltage range of 1.3V ~ 4.0V, error <± 5mV);

(2) using the method of learning waveform waveform comparison, test the correctness of the infrared transmitter encoding;

(3) provide static current test, range of 0.01-100uA. 0 ~ 40uA, the accuracy ± 0.01uA, 40 ~ 100uA, the accuracy ± 0.5uA;

(4) provide dynamic current test, range is 0-100mA,, accuracy ± 0.1mA;

(5) The carrier error detection accuracy of 1%;

(6) fully simulate infrared emission from the test;

(7) If matching visual inspection function, visual inspection of the technical indicators are as follows(See Remote Visual Inspection Machine Technical parameters):

1) Minimum detectable defect diameter is 0.2mm;

2) use of program-controlled long-life LED light source and a unique optical design of the structure, the light source life of three years or more, can be adapted to surface drawing, uneven, reflective, curved buttons and other types of remote control clear imaging;

3) Four remote control image acquisition and processing time of less than 4 seconds, the equivalent of 1 second appearance of detecting remote controls;



Used machine design, no special installation requirements, the external input is as follows:

(1) Voltage Input AC 220V ± 10V,Power 350w;

(2) Gas source input 4-6Bar;